The ESU LokSound Ver 5 DCC Micro 8-Pin decoder with ribbon cable is perfect for HO scale models. It's ready for programming, and if you need the sound file loaded, Yankeedabbler will do it for free. Just add the sound file number or locomotive type in the 'add order note' in your cart. You can view the ESU Sound Library here: https://projects.esu.eu/projectoverviews/18. We can load any ESU sound file for you. You can also buy a LokProgrammer from us (stock number 53452), though it's not always necessary as decoders can come pre - loaded with sound files and CV changes can be made via control systems. The new LokSound Select Micro decoder is very small, only 0.98 inch x.417 inch (25mm x 10.6mm x 3.8mm), and is shipped with an 8 - pin NEM 652 connector for easy installation. It doesn't need heat sinks due to its unique thermal design. We offer high - power 4 - Ohm speakers for LokSound Select decoders. The LokSound Select can work on both conventional and DCC layouts. It follows NMRA DCC standards, supports different speed steps and addressing, and can switch between DC and DCC on the fly. Programming is easy, even on the main track. The decoder has a 32 MBit memory chip with high - quality sounds. It offers multiple whistle and horn options, a fast - responding whistle function, 8 - channel sound, synchronized brake squeal, manual notching, and individual volume control. Steam and diesel decoders can produce over 20 sound effects each. You can customize your sounds easily, either by using one CV or downloading new sounds with the LokSound Programmer. It has superior motor control with auto - detection and Dynamic Drive Control. The LokSound Select Micro has 4 function outputs with 180mA constant current, and provides various lighting effects. All outputs and the motor connection are protected against overload and short - circuit. The decoder is also firmware - updatable with an ESU LokSound Programmer and a PC.

Using this ESU LokSound decoder is a breeze. First, if you want a specific sound file loaded, add the sound file number or locomotive type in the 'add order note' in your cart when you place your order. If you don't add anything, you'll need to program the decoder yourself. You can use the LokProgrammer if you buy it from us, or make CV changes through control systems. When installing the decoder, it comes with an 8 - pin NEM 652 connector, which allows for flexible installation in DCC - ready models. No heat sinks are needed. For operation, you can use it on a conventional 'analog' layout with a DC power pack, but for all its features, go for DCC operation. It can switch between DC and DCC 'on the fly'. You can program it on the main track or use a computer with the LokSound Programmer for more comfortable programming. When it comes to sound customization, you can use one CV to select basic sound elements, or download new sounds using the LokProgrammer. Remember, all function outputs and the motor connection are protected against overload and short - circuit, but still handle with care. To keep it in good shape, avoid exposing it to extreme temperatures and moisture. And since it's firmware - updatable, check for new software versions regularly using an ESU LokSound Programmer and a PC.